Operation of a standard electric boat trailer winch is relatively simple and straight forward. Hook it to the boat and lower or raise it in and out of the water, right? Not so fast, Captain Ahab, there are a few points to this to make sure there are no mishaps while operating the winch.
First, you need to check the operation of the winch when it isn't hooked to the boat. Run the cable out and check it for frays and breaks, if any are found, change the cable immediately. A stretched cable that snaps can cut right through most anything it hits and you will be one of the closest things to it.
Make sure the rest of the moving parts on the winch are in good working order. Check the bow eye on the boat itself, making sure it's secure with no cracks around where it is mounted on the boat. If you are lowering the boat or putting it on a trailer, a lot of strain is put on all these points.
Making sure the trailer is partially submerged in the water and the brake on in the truck. Unfasten the boat from the trailer, making sure the winch is hooked to the bow eye, then lower the boat into the water. Since most winches only run at a single speed, there's really no need to try and rush this process.
By the same token, when putting the boat back on the trailer, insure that there are no obstacles to slow or stop the boat from clearing the water and moving up on to the trailer. This is where the possibility of the cable snapping comes in. If the boat doesn't move freely on to the trailer, excess strain will be placed on the cable. This will cause stress cracks and breaks in the cable over time.
It is very important to follow all safety precautions when operating a new boat trailer winch. Regular lubricating and maintenance will help with a long lasting relationship. IF you want to know that how to use Boat Trailer Winch then visit boattrailerwinch.net to get the right answer.
No comments:
Post a Comment